Air-to-water heat pump, monoblock Crystal OPAL CLM-16AP

Heat pump air - water MONOBLOCK

The monoblock heat pump is a compact system for outdoor installation, which means that the space inside remains free. It is suitable for installation in all types of properties, especially locations where space is limited.

Through Air-to-Water heat pump technology, energy from the outside air is transformed into heat that is used to heat your home and produce DHW. The technology is also used for cooling. The main advantage is that up to 75% of the required energy is extracted from the outside air.

* When selecting two different temperatures, which requires control of 2 zones, the set water temperature in heating mode must be the higher one.

* If terminal units are connected for both heating and cooling, installation of a 2-way valve on the heating circuit is required, which is controlled by the heat pump and stops the water flow in cooling mode.

Freon R32 (HFC-32) with 0 ODP and 675 GWP, low carbon content and no harm to the ozone layer. R32 contributes to environmental protection by reducing CO2 emissions by 77%, compared to R410a.

Integrated hydraulic module

In the case of the monobloc heat pump, the indoor and outdoor units are combined in one module. There are no refrigerant connections as the monoblock is connected solely by water. At the same time, components such as the plate heat exchanger, expansion tank and water pump are pre-included in the package.

High efficiency compressor

Thanks to a high-efficiency compressor, a large-area heat exchanger and a precise control system, the heat pump maintains a high temperature even at low outside temperatures.

High water temperature

The monobloc heat pump operates over a wide outdoor temperature range, from -25°C to 43°C. It provides hot water for heating/ DHW at temperatures up to 62°C throughout the year. It is extremely suitable for residential and commercial applications.

Management

The air-to-water monobloc heat pumps have 3 different ways of controlling the unit to meet specific customer requirements.

Protection against overheating

• Compressor outlet temperature
• Condenser temperature
• IPM module overheating protection

Wi-Fi wired control with touch screen

• Management Mode
• Weekly timer function
• Electric heater
• Forced unloading
• Sterilization
• Protection against freezing
• Wi-Fi control

Modbus control

The board of the outdoor unit has a built-in Modbus control port, which allows it to be connected to an external control or a PC via Modbus protocol.