+359 2 953 33 25

Inquiry
Inquiry
Inverter air-water heat pump Crystal ONYX PRO
Inverter air-water heat pump Crystal ONYX PRO
Inverter air-water heat pump Crystal ONYX PRO
Inverter air-water heat pump Crystal ONYX PRO
Inverter air-water heat pump Crystal ONYX PRO
Inverter air-water heat pump Crystal ONYX PRO

Inverter air-water heat pump Crystal ONYX PRO 8S

Inverter heat pump type air-water split system. Many applications in one system - Heating, cooling and DHW with just one system. DHW can also be used for underfloor heating, radiator heating and fan coil units.

SKU: PRO-CLO -8S-PRO-CLI-8S Categories: ,

Inverter heat pump Crystal ONYX PRO type air-water split system

Many applications in one system

Heating, cooling and DHW with only one system. DHW can also be used for underfloor heating, heating with radiators and fan coil units.

 

Environmental protection

Freon R32(HFC-32) with 0 ODP and 675GWP, low carbon content and no harm to the ozone layer.

 

Energy efficiency

ONYX PRO heat pumps use a renewable energy source. The use of renewable sources reduces energy dependency.

Wide operating range

  • Operation in cooling mode up to 46°C
  • Heating operation down to -28°C

Management

  • Full touch colour screen
  • Easier management and monitoring
  • Built-in WiFi module, TUYA app
  • Temperature curve control
  • Room temperature control
  • Two temperature zones
  • Control of additional sources
  • Cascade control of up to 15 machines

Components of the hydraulic module

  • Built-in electric heater 3 kW (6 kW optional)
  • New board with more inputs/outputs
  • Electronic pump with speed selection
  • Larger expansion vessel - 8 L

External body components

  • Single-valve vacuum unit
    Mini VRF based
  • GMCC dual-rotor compressor
  • Reinjection of refrigerant
  • DC low-speed fans
  • Combination board with cooling from the refrigeration tract

Dimensions

High efficiency at low outdoor temperature

Thanks to a high-efficiency compressor, a large-area heat exchanger and a precise control system, the heat pump can maintain a high temperature, even at -10°C and -15°C.

Technical data

External body PRO CLO-8S
Internal body PRO CLI-8S
Technical parameters
Heating output/COP(A+7°C/W35°C) kW/COP 8.00/5.05
Heating output/COP(A+7°C/W55°C) kW/COP 7.70/2.85
Heating output/COP(A-7°C/W35°C) kW/COP 8.00/2.70
Heating output/COP(A-7°C/W55°C) kW/COP 7.00/1.95
Heating output/COP(A-15°C/W35°C) kW/COP 6.80/2.27
Heating output/COP(A-15°C/W55°C) kW/COP 5.94/1.33
Cooling Power/EER(A35°C/W7°C) kW/EER 6.50/2.95
Cooling Power/EER(A35°C/W18°C) kW/EER 7.00/4.40
A+7°C; W35°C

(ErP-moderate climate)

 Prated/SCOP kW/- 8.80/4.90
ηs 30°C/35°C % 190%
EE class 30°C/35°C – A+++
A+7°C; W55°C

(ErP-moderate climate)

 Prated/SCOP kW/- 7.50/3.30
ηs 47°C/55°C % 129%
EE class 47°C/55°C – A++
Hydraulic module
Power V/Ph/Hz 220-240/1/50
Power cable mm2 3×2.5
Communication cable (indoor-outdoor) mm2 2×0.75 (3×0.75)

+ shielding
Noise - power/pressure (1m) dB(A) (1) 42/34
Dimensions(W*H*D) mm 490*342*910
Packaging(W*H*D) mm 620*425*1105
Net/Gross weight kg 59/64
Water Connections (Ex. - Ex.) mm/inch DN25/1'' - DN25/1''
Water pump – Electronic, 9 mH2O
Expansion vessel L 8.0
Power of electric heater kW 3.0 (6.0 - optional)
Max. power kW 3.3
Max. peak current A 16.0
External body
Power V/Ph/Hz 220-240/1/50
Power cable mm2 3×4
Noise - power/pressure (1m) dB(A) (1) 66/58
Max. power kW 4.4
Max. peak current A 20.0
Dimensions(W*H*D) mm 1032*445*807
Package((W*H*D) mm 1075*495*875
Net/Gross weight kg 67/73
Air flow m³/h 4200
Freon pipe diameter mm 9.52/15.88
Max. pipe length/deventilation m 30/20
Chl. Agent Type/quantity kg R32/1.7
Recharging after 15 m g Total pipe length - 15 m)*38 g/m
Operating outdoor temperature Cooling °C -5 ÷ 50°C
Bathroom Heating °C -25 ÷ 43°C
BGV °C -25 ÷ 43°C
Water temperature in the installation Cooling °C +5 ÷ 25°C
Bathroom Heating °C +25 ÷ 62°C
BGV °C +40 ÷ 62°C

Related products

Personal consultation

Contact us for a free personal consultation. Our team will help you choose the best solution for your needs.